How To Wax Your Car

Waxing is one of the most important factors when it comes to keeping your car looking as good as new. Even though most people tend to wash and maintain their vehicles, but waxing and using car bodywork protection film isn’t followed by many people. We are going to discuss how to wax your and keep your car gleaming for years to come. Let’s begin!

Purchase A High-Quality Wax

The first step of waxing your car involves purchasing high-quality wax. Today, you have several different types of waxes but generally carnauba wax and paint sealant tend to be the most popular. While carnauba waxes are designed to provide extreme gloss and do not last long but paint sealants are designed to last longer and offer more protection.

Depending on the brand you opt for, the application procedure may slightly vary as well. In addition to that, the color of your vehicle is a deciding factor too. You might want to use different products for dark and light-colored vehicles.

If you are someone who is waxing their vehicle for the first time, we suggest opting for something that is not overly priced. Initially, you would want to practice even application and removal.

Wax Undercover

Before waxing your vehicle, you should ensure that it does not come in direct contact with the sun, water, or any other external factors, especially dirt and dust. You should find an area that is covered from all four sides to keep the vehicle as protected from contamination as possible.

Prepare Your Vehicle

The next step is preparing your vehicle. Keep in mind that the preparation step is the most important and should be done with patience. The purpose of the preparation step is to remove all the dirt and contaminants to help the wax bond to the paint. Waxes comprise many different chemicals that are absorbed by the paint. Therefore, if the vehicle is not properly prepared before wax application, do not be surprised if you achieve an even gloss.

To prepare the vehicle, you need to purchase a pH-neutral shampoo and use a microfiber cloth to remove the dirt and dust. The next step is drying the vehicle and for that, you will then again, need to use high-quality drying towels. Make sure that the vehicle is completely dry before applying the wax.

Read The Instructions

As mentioned earlier, the instructions related to the application process vary based on the brand. Some brands do not suggest applying the wax directly under the sun, while others do. Additionally, some waxes require somewhere around 10-15 to dry depending on weather conditions, whereas others are removed as soon as they are applied.

Moreover, some waxes are only applicable through a DA polisher, while others can be applied by hand. This factor should not be ignored as a wax that is only applicable by a polisher will not provide the best results if applied by hand.

Choose An Area To Begin Waxing

Now that the vehicle is completely dry, you can begin waxing by choosing an area on the vehicle. If you are new to this, it is better if you start from a small area and make your way to the bigger ones. Make sure that you do not leave the wax on the vehicle for too long. It won’t damage the paint but removing it can become a pain. A good start will be the front fender panels.

Apply And Wipe Off

Begin applying the wax in a circular motion. Apply a thin layer but evenly on the entire area with 2 or 3 passes. Make sure that you do not apply excessive wax as it can become difficult to remove. Once the wax has been applied, allow it to rest for a few minutes until it is dry. Upon drying, use a microfiber cloth and remove the wax. Inspect the vehicle for any missed spots, especially in the tight and narrow areas.

Final Word

Waxing your car simply involves using the right products and techniques. By following the tips mentioned above, you can easily wash and wax your vehicle any day of the week to keep it in top condition. Moreover, consider installing a PPF from a certified paint protection film installer Springfield.

Share this post:

Recent Posts

Leave a Comment